Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Common Questions & Troubleshooting (http://www.aleromod.com/forums/forumdisplay.php?f=17)
-   -   A Lil Trouble Once More With The 3.4 (http://www.aleromod.com/forums/showthread.php?t=9620)

kenshu 10-18-2005 04:09 PM

For some odd reason my 3.4 alero has been idleing from startup at a lil over 2k RPMs. I have already replaced the TPS(Throttle position Sensor) but it still idles high. Even when i drive the idle stay around the 1500 RPM range. Any opinions on what is wrong?

jamcllw 10-18-2005 04:26 PM

probably a vacuum leak somewhere

jackal2000 10-18-2005 05:13 PM

yea mine used to do this too, never did figure it out before it stopped. i was told it could be a vacuum leak as well though.

freakout 10-18-2005 11:38 PM

Same thing happen to me on the weekend. Idling way to high around 2500. Mine was the Idle Air Control Valve. It is located above the TPS. It allows air to bypass the throttle blades to control idle speed. You might want to try a good intake cleaner it might just be carboned up. I was on my way to Chambersburg, PA from up here in the great white north. I think it was around $38 at PEP Boys. Mine didn't throw a code.

freakout 10-24-2005 01:16 PM

Every once in a while mine is staying up around 1250. Don't think it's vacum if I shut the car off and restart it, it returns to normal (750). I thought they were supposed to idle around 600 rpm. Mine is up around 750. All this with no load on engine.

jackal2000 10-24-2005 04:43 PM

mine idles at around 750 normally

Lovestheh20 10-24-2005 05:35 PM

what is it when you have a cold start and your idle is bouncing from 1000-1250ish? I get this from time to time.

Fritzee 10-25-2005 03:55 PM

Mine was also acting up. Where the idle would act up every once and a while.. I also noticed that if I turned the engine off it would usually reset. I found on one web site some advice that helped. I cleaned the MAF sensor and now it behaves properly. That is actually what brought me to this site. I was looking to see where I found that info because there was some other good info there as well.
Does anyone know some good links for technical help with wiring.

freakout 10-27-2005 10:26 PM

I'll try cleaning the MAF. It does it warm and cold. Doesn't drop off high idle when it warms up, shut it off, resart and it sits at 750. Start it warm and 1250 restart it's normal. Sometimes you need to restart it a couple of times. Does it maybe once a week. When the IAC valve went it would be as high as 4000 sometimes, but mostly 2000. Did it ever get a kick in the tail going down a hill.


All times are GMT -4. The time now is 05:15 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.