If anyone remembers me searching for a fog light with the assembly in my old posts before the site went down, I've found one! :D

Cost $40.00 + Tax
Found in Central NJ: Ringoes - Lentini Auto Salvage 1 800 735 8464

I need to know what tools are needed to take off the front bumper, and if it is really required to mount a fog light assembly? :unsure:

i installed my fog lights without taking the bumper off... its kinda crammed.. but jacking the front end up a bit helps... if you do take it off though, i BELIEVE there is just to bolts directly ontop under the hood, and then those black plastic pull out screws in the wheel wells... if you are going to take it off, goto the hardware store and buy new of those plastic black screw things because you will probably break all of them getting them out.. (atleast i did)

i took mine off when i installed my cai

theres alos bolts which hold the bumper onto the fender

Okay I see what you all are talking about with the plastic brackets! I'll have to attempt this on my own...Thanks