2 LEDs IN!!
 

Well I finally got 2 replacement 194 bulbs, Blue LEDs. I bought the eurolight ones at Canadian tire. Now i wondering... where should i put them...
I'd want to change all of them, but I only have 2 for now so ... any ideas of where it would look best?

i.... unfortunately, can't help ya here. :lol:

i do custom replacement... not direct. i have no idea where 194s fit.

LOL your a king of custom ... i admire you ... i m gonna be starting my custom work this summer ( i m off al summer for parental leave :D)

try the PRND321 cluster thing, i think it takes 194's

^ indeed it does, and it looks really good with blue ones. ;)

or the footwell lights.

footwells i want to put cathodes and a LED swith so i think ill go with the PRND123 ...
Sound like a good idea and is the Center area behind ash tray a 194 bulb?

is the trunk interior light a 194, im thinking it probably is, easy spot, big difference

no the one in the cubby area is not, thats a tiny little shit, break it and pull it out, odnt bother with a light there, if you really want one do a led later but for now ditch it, i hated that thing, the interiors got nice green lights to the buttons adn that yellow effer right in the center eww

Agreed lol

I checked my automatic shifter, i found the pin to pry out...but i don't get how to pull it out and how to get to the bulb under the PRND123...

on the front of your shifter the is a u-shaped pin. pry it out with a flat blade screwdriver all the way then pull up on your shifter, it'll come off. then just get your finger under the edge of the bottom plasic peice and pull it up. I put led's in mine under there and it looks cool.

Wow thanx!!!
i m gonna do that later today and post pics

Heres before


And heres after


I took photos of every step to di this so i might write up a How-to if it interests anyone...

im very interested actually. i wanted to put red ones in my dash and the shifter thing.

Looks good...almost makes me want to do mine.

theres a light under the prnd321 hmmmm. sounds like it's time to rip apart my shifter area to change it.

:lol: ...wow

Or do it like mine, blue and then red behind the redline and behind the gas gauge, becasue then you get this coloring aaand, as the needle goes up farther it goes from blue to red.

ew.

hotspot central.


man i'm glad i did these myself instead of this way.... :lol: