Would it work?
http://www.ebay.ca/itm/FOR-COBALT-HH...vxp=mtr&_uhb=1
I'm not that familiar with the variations of the 2.2l ecotec from the alero and the cobalt. My question is: would this header work? This one seems better with the coating rather than the stainless steel with a ton of welds. |
Our motor is a l61 and the other code is for a 2.4l ecotec...it should bolt to the motor the only thing to check is clearances between the motor and the firewall as the different cars have different amounts of space, i think you should be fine though
|
Quote:
This. A lot of the J-body guys run the LSJ pacesetter headers on their Ecotecs. People are gonna say that they're junk, but the J-body guys seem to prefer them. |
I'm looking at getting the pieces together for a complete exhaust, but I want it to be as quiet as possible.
|
highest flow with the lowest sound my exhaust is 3" the entire way and quiet. |
^^ I like the sound of this. I'll look into it, thanks.
|
So this is pretty much all I would need for the exhaust other than pipe to connect everything?
http://www.ebay.ca/itm/3-Magnaflow-U...-/110847989857 http://www.summitracing.com/int/part...1054/overview/ http://www.amazon.ca/Vibrant-1142-Ul.../dp/B001806YE2 http://www.ebay.ca/itm/Tsudo-02-05-C...vxp=mtr&_uhb=1 |
All times are GMT -4. The time now is 02:37 PM. |
Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.