I just picked up a rear sway bar and I have no idea how this thing goes in..I really haven't even had time to take a look at the rear end...just was trying to figure out if somebody knew how these things went in.

Did you ever get the hardware for i tor at least determine the size needed?

emailed PFYC and they said the bushings were all we needed.

Did you get those?

yeah they're on there....

Pull back carpet on both sides...you'll see a black flexible plastic cap on top of the strut "hump"...squeeze the sides in and pull both caps off. Then you'll see 3 studs sticking up. You just remove the one nut from the inner of the 3 and place the mount for the strut bar over the 3 studs and replace the one nut again and your bar should have come with 2 nuts to place over the studs that don't have nuts already. Here's some pics to help you!

not a strut bar a sway bar

oh son of a bitch lol........went out and took those pics for nothing! My fault!

haha...chucklehead...LOL...so anybody know how to put a SWAY BAR in?

just crawl under and look, it'll take about an hour, but its real easy, just dont get the endlinks mixed up, and use all of the supplied silicone. once you look at the situation you wiil see its fairly easy.

http://invision.aleromod.com/index.p...opic=13529&hl=


http://www.grandamgt.com/forum/showthread....&threadid=14989

Let me know how everything works out & if ur still interested in led's

I used the Links above to do mine last night. But IMO it didn't help me much. So i just went out and did it. took me 40 min to get the old one off and out the new on when in fast but the brackets gave me a hard time. I was done in an hour and a half.