Turbo Downpipe Help
 

ok ive looked and looked and i really need help finding out what the hell kinda D-pipe i need, and yea i know its small, im not gunna be runnin more than 8 PSI

the flange for the downpipe will be a 5 bolt flange.

Even if its only 4 bolts? I don't mean to be like AR here and ask 20 questions I just wanna be sure

Looks like the same to me. cept u do have 4 bolts. LOL

Those still looks different to me eyes.. Post the turbo model..

That's weird how it's designed... most of the time the wastegate flapper is part of the flange that you weld the downpipe to.

yea i know

What turbo is it? The 5 bolt flange Aftermath posted will work on that turbo, you just won't use the one hole.

Nah. .lots of internal wastegate flaps are on the turbo itself. The flange you posted I have rarely seen around.

doesnt look the same bolt pattern to me!

Nope, it definitely looks like it has some unique bolt pattern and not the typical T3 turbine flange.

What car did this come off of? Or any idea of what model Garrett this is?

Its the same. It just doesn't have that other hole. Look at it again.

I just worked on one the other week, making a 5 bolt flange downpipe.

Even splinter backs me up.

ok so apparently imma dumbass. in the box that my turbo came in there was a bag with the wastegate actuator and a bunch of bolts, so after writing an pissed off message to the dude i bought it from, i found this in the bag...

would just any exhaust shop be able to do the welding for it?

lolfail.

/thread

eff u

yea.. any exhaust shop can weld it. If you want pretty.. find someone who can tig weld it.

alright thanks

that turbo is small as hell, do you have a 4cyl or 6cyl.

you are going tp have boost at start and on.... LOL im not ripping on you, to me the turbo seems small but i guess you dont have to worrie about turbo lag.

it's just for the stock engine im runnin now im bored with NA like i sed its a temporary starter and its not doin over 8psi if that

What Size Is The Turbo?!