Was Bored Yesterday
what do u think it is all smoothed now and pimed just have to charge up cam to take the finish pics what u think though
|
ouch your gonna have a big gap btw the bumper the bottom end of the filler plate. Application could be better too. The cleaner the application of bondo/glaze putty, the quicker and easier it is to sand. I hope its a filler plate under there and its welded good.
|
haha oh geez
|
^exactly what i was thinking...
|
Quote:
|
i sure hope you have experience in metal fab work and know to apply a weld through primer on the metal before you weld, and like he said the metal work can be better thats why ya make templates before you cut and shape metal
on the back side apply a etch primer so it does not rust i hope your going to finish it up and reinforce the rest of the metal |
i know i know i suck ass with filler but heres the after pics and 2 hrs of sanding i still have a couple holes to fill so dont give me crap i know!!!
|
sry wrong one
|
well ya still have a BIG gap btw the bumper and filler plate and ya should of taped off the bumper or remove it when sanding or apply filler so you don't get any on it. Still got HOURS (like 10 hr + ) of sanding to do. Can't rush perfection. It will show in the paint if its not perfect. primer usually doesn't show too much flaws and i hope that the primer isn't rattle can either. Or you'll have to redo all the work after when the car is painted a few months down the road.
|
eh looks like you should do some more more work to it. Lol why didn't you at least take the rear fascia off when you did it? Keep at it, you're past the point of no return anyways.
|
cuz it was cold and im lazy when it warms up im going to fix the rear bumper and then finish it
|
usually im all for people doing there own work......... but in this case it looks like you shouldve let someone do it who actually had a clue as to what to do
|
whats wrong other then the bottom
|
so you are not having any tail lights??? cause I see the other ones are covered up too.... I would have just covered up the inside tails...
|
They look very nice! Keep up the good work! You should do that for a living!
|
I'm with everyone on this one. the bottom gaps should be closed more but other wise not to bad.
|
the bottom will be closed im just going to redo my lights before i mold the rest i have tail lights in my bumper
|
Looks like it'll turn out good once you get it all finished!
|
I am VERY VERY iffy on this one.... I'll wait till you get it done before I make any comments.
|
yea im iffy too, im trying to picture what it will look like with only the inner tails. but big props to you man for doing this, good luck, it looks good, just fill in the bottom like everyone else said, and take your time, make sure everything is perfect.
|
All times are GMT -4. The time now is 08:11 AM. |
Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.