Alright, I finally got the wai today that I ordered like.. 10 days ago. It's for a 2.4 Cavy but as people have said before, it will fit. Anyway, I'm having trouble with the battery. Has anyone had to relocate their battery in order to get a wai to fit? I'm prolly gonna get laughed at for putting it like this, but at this point, I really don't care...I've been up since 7 last night and need to get this done soon so I can go to bed. I don't know what it's called but imagine you're putting jumper cables on the battery.. the thing you hook the cables to, it is sticking out too far. Could I get a smaller one or what? Any help will be sooo greatly appreciated... Thanks.

i did not have any problems with mine...but pics would help!!!

you shouldn't have to move it...you should have just bought my cai...

which WAI is it? I have the AEM one and it fits fine...
pics!

Here's the pic.. I took the thing I'm talking about off but you get the idea.

And Brad, I didn't want a cai because of all the rain we get around here. Already had about 10 inches in the past 3 days.. sorry!!

It shoudl look like this when is all done.
It should just hook to your TB with the 90 degree and then have a nut to hold it up on the Power steering resevior.

MINE WAS A TIGHT SQUEESE...BUT IT SHOULD FIT...

it should fit in there no prob marie...mine was tighter then hell, but it fit just fine

Marie, if the other guys say it'll fit, i gotta assume they're right. WORSE-case scenario, you might try buying another battery. They make replacements that have the terminal posts on top, instead of the sides. Just make sure the cables going to the battery would be long enough, should you choose to purchase another battery.

Good Luck dear. :)

bad pic, but heres how mine fit...hope it helps you out any

Thats exactly how mine hooked up and also you may have to kinda tug the wires for the sensor to go into the spot.

instead of tugging on the wires, cut the loom/tape a lil for more slack...theres way less chance of pullin somethin you don't want to ;)

I didn't know you could take the posts off...isn't that a bad idea? I thought for sure it would leak.

They splice out of the main wiring harness I wouldnt cut the loom unless you are really handy with a knife. THe wires do reach but not good or you can get the Extension from PFYC.

a pair of good scissors worked fine for me

Thanks for all the input guys. I got it done though.. well I didn't but my Dad did. Yeah yeah yeah, I'm a daddys girl. lol.. I'll post pics in a couple of days.. Still working on a few more things and I want to get them done before I post pics.

hey, as long as it gets done, it don't matter how it got done :lol:

glad you got it in there good marie, can't wait to see those pics :thumbsup:

Thanks Pat.. here's a little preview of something else I'm working on...

:eek: i like what i see :thumbsup:

^ oooh