Coupe turbo project
Well i decided to make a thread in the showcase so i can have a full time line of my build for everyone to see and comment on.Well my build wouldnt be half of what it is without the help from Marcus(OEM) over on j-body (Very good guy to do business with).Hes the one doing my engine build and alot of other custom goodies down the road.The start of this crazy build is a 1999 2.4L coupe that i bought from tr4v1sf so on to the pics.
The day i picked it up Finally got it off the trailer at my house Now to the good stuff the engine rebuild which includes: 9.1 Wiesco Pistons 2.3 Oil Pump P&P Head Bore 20 Over SS valves (1mm over) LMZ stage 2 cams Valve Lift INTAKE 260* - 377 EXHAUST 268* - 375 Bronze Valves Guides Machine Block for 2.3 Rebuild Head Boil Block Arp Main bolts Arp Head studs Stiffer mantapart springs Eagle Forged Rods Cometic Head gasket All the parts laid out Head gasket .20 over bore 9:1comp Wiseco pistons Eagle H beam rods LMZ stage 2 cams Valve Lift INTAKE 260* - 377 EXHAUST 268* - 375 1mm over sized valves New springs |
Now the Engine build part
Spare LD9
Dirty dirty head Just a little dirty Oil pan modified for the 2.3 oil pump Finished pan with my oil drain bung welded on Head back from being P&P I should have pics of the block up this weekend :yahoo: |
honestly with all the work you are putting into the motor your cams seem pretty weak sauce to me......
|
maybe he wants drivability?
|
caint wait to help you install this bad boy! got new HL's for the coupe yet?
|
Quote:
LZM Stage 2 are amazing according to those who have 'em |
maybe compared to stock, but overall, the numbers just seem fairly weak, I would expect something in the 500 plus range for lift.....
|
well the title says "turbo coupe project".. maybe this stuff is building up to hold massivee turbo boost?
|
ya this is going to be my dd so i didnt want an extreme cam so i found a middle ground between the secret cams and w41
|
Cool, lookin forward to seein a final project out of this, looks like this project has some major potential.
|
i hated having the alero as a project and dd, it is so much easier when alero is just a project and if it's down i don't have to worry about getting to and from places.......
|
Quote:
its not my dd now but it will be when im done |
Well i think i might change my mind and go with the M62 insted of a turbo
|
why? funds short?
|
yes why?! turbo is way better
|
Quote:
i wouldn't go that far..... |
Good luck with the manifold for the 62
|
Funds are fine i was just brain storming ideas and i might go with the M62.The manifold wont be a problem and id like to have instant boost i still have to look into the max hp out put of the M62 before i got making any definite choices.Id like to here peoples thoughts on it but i dont want to hear "turbos are way better cause i like them" id like FACTS im shooting for 350-400whp with full suporting mods like meth injection,3inch exhaust,a/w h/e,stand alone,suspension & drive train upgrades.
|
why not just get both?
|
stand alone suspension? as in you don't have to hold them, don't they always stand alone...:lol:
also if you are doing a hEaton with a custom manifold why not look into different blowers? whipple i may suggest..:scpimp: so much more effecient and they thrive on high boost, think 18-25psi.... also please no matter what blower you use, try to integrate a w2a intercooler before you resort to meth injection.. also look into e85 tuning, race gas for pump gas price :yahoo: |
All times are GMT -4. The time now is 01:04 PM. |
Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.