Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Audio, Video & Security (http://www.aleromod.com/forums/forumdisplay.php?f=16)
-   -   Keyless entry remote programming (http://www.aleromod.com/forums/showthread.php?t=38565)

Laurens_Europe 11-21-2015 11:51 AM

Keyless entry remote programming
 
Hi all,

This is about a 2001 model.
I bought a new remote for keyless entry on amazon but can't get it to work.
I found the programming sequence online:
Close door, hold unlock button, key in,out,in,out,in and release unlock button.
Chime sounds 3 times and when i hold the lock and unlock button on the old remotes for 15 seconds the chime sounds, but when i do the same with the new remote, nothing happens.

Anybody?

falloutboy 11-22-2015 06:31 AM

You do realize that Export Models have a different kind of remote and frequency the theft deterrent works on? And that US Style remotes do not work.

In Addition a completely new remote has to be programmed to the BCM, depending on the modelyear this can be done by everybody or for the later years you need a Tech2 or other kind of suitable programmer.
Which, again for the Export version, are nigh to impossible to get.

Papa Rad17 11-22-2015 03:03 PM

did you have keyless entry to begin with? if not then your car isnt even equipped with a receiver for the remote. check the batteries I assume?...


All times are GMT -4. The time now is 08:11 AM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.