Tweeter and 4x6 wiring
 

Anyone have any pics of the stock tweeter connections? Gonna hold off on the third amp and the 6.5 components till I can get some answers to my Q-Logic enclosure issues. So I' am going to wire the Polk DB461's and the Kappa 693.11i's off of the Excelon. Just wondering how to tie in the stock tweeters.

You pretty much have to get a separate amp for the tweeters since the 4 channel will already have 2 speakers per 2 channel. I am running into a similar issue because I'm planning on adding 4 to 8 1" dome tweeters in the car (some in the a-pillars, and 2 in the factory position) and I need to get another amp for it.

Meh I was hoping they spliced into the 4x6's after the crossover if there was one. Not gonna run an amp for two tweeters LOL. Any chance you had the Monsoon? Pictures of the 4x6 and tweeter wiring?

I don't have the monsoon amp and when I added the 4x6s a while back, I removed the tweeters because I didnt want to share the power.

Gotcha thanks I wonder if having the monsoon makes a difference at all. The way I' am going to run them for now will have the 4x6's overpowered quite a bit so maybe I can find a way to make em share with the 4x6's.

This. Just unplug the tweeters. Can confirm no adverse affect.