Build thread ideas and advice is welcomed
 

Well wanting to get the car back togther as much as I can. I need a new trunk lid and both fenders. Trunk will be shaved again going to salvage yard to hopefully find parts. The front and rear bumper needs to be grinder out in some spots and glasses over. Outer tails has to be rewelded got busted for no tails have some bmw lights tapped on. (sad I know) Had lights in back window only officers didn't like it!! also really wanting to do a unidrop with a cataliver set up. Need a new windshield but don't really care it's at the bottom of the list. Figure tubing up front and 1x1 of 2x2 braces around engine bay. And all square in the back.
I'll post up pics as it sits now 2maro it's bad!!
and for the unidrop will 14guage be thick enough or go 11 to be safe?

And haters go for it with my past can't blame you I'm going to consirate on one thing at a time depending on pain and my bodys limitations.

Might be putting it on a frame and rwd if i can ever get a job and get all my medical problems fixed..
but heres pics:
Hornblasters.com train horn hate the location but all i could do and even that took 4ever!!


driver fender damage

Small front bumper damage that buckled both fenders one from hit and run in parking lot and other trying to drive to doc after surgery.

From hit and run pass fender.


Lastly trunk from truck damage with the pos tape taillights and tape trunk lid havent been able to fix it now, or b4 my surgery and had to get tails, the junk yard didnt have alero ones. So these are off a BMW.

Its pretty bad like i said total POS!!!!!
Wouldnt be to bad to fix most of it.

Oh and bent my 20s and popped 2 tires sold them for 200.

diggin the tailights lol

oh yeah lol thing is that tape is damn good lasted almost a year lol!

are they wired?

Yeah be kinda pointless with out being wiered

hope it all goes well

Maybe we should start a club of POS aleros cause I got a doosy like you do. Idk though, yours looks a little worse at this point. Hope your rebuild goes well! It is a difficult thing to come back from without some serious money so hope you have that lined up or you can do it all yourself... But again, good luck man and keep us informed.

Ever get that center consol worked out?
Working on guages now and dk bout rest of car it all depends

wow.........just wow

Damn I thought mine was bad.

Buy some AAS fiberglass fenders, fix the FG damage, replace the trunk lid, put the horn behind the rear bumper cover, then paint it something. Bag it if cashmonies allows that, tuck up those black stockers (they look good actually, it looks like).

That's what I'd do to clean it up at least..

If you really do some of those ideas it'd be sweeeet though.

i cant even say anything

Thought of aas fenders hell there only like 30 bucks more then stockers,and shave the vents on them. The train horn is actually my buddys so that one isn't staying on there it's temp. But it is hooked up inside to a button and also to my door remote. The remote is great with windows down car parked peoe walk by and honk!!!!!!!! And there looking around to see who it was lol

Told you it was bad lol! Think that's the first time anyone has ever rendered you speachless. Good news the holes on spare tire holder, do have clear coat over on them. Rustoleum to prevent rust..

That horn was on a geo metro for awhile lol

I have two trunk lids come get them I can give you fenders to

LoL pimp, i think mine was the first to make him practically speechless when he actually saw it in person, but online, i think you may have gotten the win on that.

If you were asking about my center console, then yes I got it all replaced and looks fine now. But yea, again good luck...

That's mike and that's a drive though lol, instead of working 20hrs in new York come here.
And sry 01alero was thinking you were someone else, guy I got my skirts off of.

yes aaron it did
but to u dude why dont ya try this, if the 1/4`s are that bad and beyond any kind of repair, start from scratch splice in new 1/4`s, yes it can be done i do it, its fine

and then construct new tail lights, instead of building on the 1/4 with metal and more metal and more metal and more welding and more welding, and more bondo and more bondo and more bondo

im suggesting start from scratch

1/4s are fine minus the pass side has a nice little dent.