How To: CAI to WAI and back again
 

I've been getting a lot of questions on this so instead of explaining it, here are some pics.

WAI to CAI.

Go to your WAI intake:

Remove filter

Install elbow or turn elbow if stored under the hood.

Tighten hose clamps as pointed to in 3rd pic

Tighen hose clamps between elbow and downpipe

You are done, you now have converted a WAI to a CAI.

For race purposes, I remove the fender liner and the foglight.

The fender liner is held in by about 10 to 12, 10 mm bolts and 3 body rivits. There is one bolt on the top, two in the body of the car, all the rest are along the bottom.

The foglight is held in by 2 10 mm bolts, undo and unplug. Foglight can be removed from top or bottom, Really easy to get to if headlight is removed

Lol. So complicated :p

Is that made out of pvc pipe?

heh, i removed the fog light when i raced too. i could definitely tell a difference!

hes doin it wrong, the piping has to touch the + terminal on the redtop

??? Nothing for CAI to WAI?

!!sdrawkcab ti od tsuJ

I know, the mesh was burnt on that part of the filter. I went to clean the filter anyway, after I was done I noticed small holes in the filter element, so I chucked it and ordered a new one ;) I think this was causing my missing issue. I just got the new coils on Saturday, but I def need new ones anyway

BTW that termial is for the train horn power. The regular power for the car is on the side termial


HELL NO!! That's so rice and my IS NOT RICED! My piping was looking a bit old and marked up so I had it powder coated. I still have yet to find decent couplers

check out mpracing they have some universals on their website and many sizes and colors

yo i got the curved chrome air intake but there is nothing covering where the air used to get sucked in i was wondering r u supposed to cover the bottom hole with something or just leave it open or ??? i dunno

Pics?

Have no clue what your talking about

I believe your talking about the tubing for the CAI, when your using the WAI..


why bother covering it? its not going to hurt anything. MAYBE it'll blow some cold air under your hood... thats about it.

I still can't believe that this thread is still getting posts :rolleyes2: