If you have a 2.4L...
Can you go bang top down on the IDI cover using the side of your fist pretty hard and tell me if there seems to be a rattle from the timing chain area?
Lol just curious before I remove the timing cover and take a peek. I think I might have something that failed in there. |
I'll check it out here after work and let you know. What do you think failed this time?
|
Could be the tensioner is loose, guides broke, chain jumped a tooth... not sure but hoping that I find a concrete problem and easy solution. Seems to have been driving fine, but ever since I had the manual in I drove it hard, wheel hopped quite a bit and shifted hard (leading to the cracks/breakages on my turbo manifold) so I think the shock from that also transferred to the timing and might have done something lol.
I've re-used the same tensioner/chain/guides the last 4 times the engine has been apart, which began in 2008. |
Well you always did drive it pretty hard and that obviously hasn't changed. lol
Let ya know what happens after I give my ho some tough love. |
Damn I tapped things with a rubber mallet and it went away and now I can't make it make the rattle again lol.
When I rotate the crank by hand back and forth I don't hear anything weird from the chain area. Edit: Pinpointed vibration issue to the warped v-band on my downpipe. Easy fix, next week. Who knows what the other rattle is but I know that this noise is solely from the v-band being warped beyond belief. The air gap is causing some crazy harmonics as the exhaust squeezes out. Still, curious what this was. Can't reproduce it anymore, just was a random observation that one time. |
Weird. Mine didn't make a noise. At least you know what it is and can fix it.
|
All times are GMT -4. The time now is 10:37 PM. |
Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.