Aleromod.com

Aleromod.com (http://www.aleromod.com/forums/forum.php)
-   Paint and Body Work (http://www.aleromod.com/forums/forumdisplay.php?f=58)
-   -   fixing a loose mirror... (http://www.aleromod.com/forums/showthread.php?t=33230)

MomsAlero 01-10-2011 10:30 PM

fixing a loose mirror...
 
i haven't torn into the door at all yet, i wanted to ask before i did...are the side mirrors on these cars able to be tightened? my mom's 01 Alero recently developed a loose mirror on the passenger side. i know they are suppose to be breakaway mirrors but this one is just LOOSE. so, is there a way to adjust tension on mirror or do i just have to replace the entire mirror? any help would be greatly appreciated!

cavaliers60 01-10-2011 10:36 PM

if you got the one with springs in it, I know one of my mirrors had the spring mounts broke.... But you could also check the bolts... Just pull off the tweeter panel and pull out the foam piece. You'll see three bolts. Make sure the nuts are tightened down. Also check the springs and see if any of them are boken off or just came loose. You'll probably need to pull the mirror glass off for that.

MomsAlero 01-11-2011 05:51 PM

thanks for the reply! how do i go about removing the mirror glass without breaking it? i do have the kind with the springs in it. probably a broken spring mount like you mentioned...

cavaliers60 01-11-2011 06:00 PM

I just grabbed the glass from the bottom and gently pulled out. You can hold on to the top or something with your other hand and just carefully pull it out. It's not to hard. :)

Jeremyrobert83 02-13-2012 06:10 AM

I don't know if u guys got this fixed yet but seriously I just picked up 2 paint matched electric mirrors for 50 bucks

cavaliers60 02-13-2012 06:17 AM

This is an old thread from January of last year. I'm hoping he got it fixed. :lol: 50 bucks isn't bad! Nice find!

Jeremyrobert83 02-13-2012 07:01 AM

Thanks... yeah in noticed it I seen the Jan but not the 2010 till it was already poste

Papa Rad17 02-13-2012 09:18 PM

^i think chris pretty well covered it.

zzyzzx 06-13-2020 09:06 PM

I just repaired mine. Yeah the plastic for the mount part breaks.


All times are GMT -4. The time now is 03:02 PM.

Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.