[AlbinoMonkeyRat]

how to do it:
1) buy a can of VHT Nite Shades
2) Remove taillights from car
3) Clean the taillights and make sure they are very dry
4) Mask of the non-lens portion of the tail light assembly
5) Spray the tail lenses with the tint spray.
5a) Only do 2 or 3 coats, and wetsand IN BETWEEN the coats, and NOT after the last coat. (this is to ensure that you get little or no orange peel effect on your tint-job.)
6) allow them to dry for about an hour (if you don't do it in the heat/sun)
6a) if you're outside while doing this and it's VERY warm out (70*F +) and it is sunny, you might only need to wait about 15-20 minutes.
7) When they are dry, return them to the car.
8) all done!