Okay, so... I'm done for the night...
Managed to get the inginition switches working, e-brake to work, and all the wiring taken care of. Doesn't seem like much, but then there's three bundles to fish through the car and connect appropriately, with a total of 240 ft of wire... including wrapping, it turns out to being quite a bit...
1. Key Cylinder mounted in the back as a "master" with complete wiring:
http://i171.photobucket.com/albums/u...cha/master.jpg
2. The switches - this will be covered by the fiberglass "spine" going in (E-brake/Acc/On/Ingintion:
http://i171.photobucket.com/albums/u...a/switches.jpg
3. Dash section of wiring:
http://i171.photobucket.com/albums/u.../wiringtop.jpg
4. Floor Section of wiring:
http://i171.photobucket.com/albums/u...loorwiring.jpg
5. Video Clip - Ignition Firing Up:
http://s171.photobucket.com/albums/u...t=MOV00294.flv
Tomorrow - the LED lighting for the e-brake will be done... after that... ummm... I'm not quite sure, I've run out of things to do for this weekend.
The sender unit for my instruments is on order, and my door-poppers were bought, so they should be in soon... instruments as well, not to mention seats/harnesses will be coming in. Until those get here... I really don't have much to do except for the rear interior of the car... but, that, as it turns out, wont be touched until next week...
Maybe I'll finish up the interior lighting...