Quote:
Originally Posted by kwhauck
metal welds can crack too, if you don't know what you are doing, or if you warp the shit out of the flares from not welding right you end up with a shitload of bondo which can also crack...
|
true.... and im hoping he knows how to weld good
Dont just run a steady bead.....make a bunch of tack welds along the flare, then run a little bead on one side, go to the other side run another little bead......then go to the other, REPEAT until done
Make sure you test the welder on a scrap piece of metal before doing it though, so you can set up the voltage and wire speed