Hooking up relay for having Hi/Low Beams at same time
I'm hooking up a 30 amp relay with a 20 amp in line fuse. I'm looking at the diagram for the 25 amp relays, the 30 and 85 and 86 are messed up between my diagram.
According to your diagram: 87 goes to dark blue, 85 goes to pink, 30 goes to ground, and 86 goes to 12 volt power source (assuming a passenger headlight).
The diagram on the back of my relay box goes: 86 to negative trigger, 85 to 12 volt power source, 87 a not used, and I'm mixed up on what to put on 87 and 30 according to the diagram below (I know I have to put the blue and pink wire here but does it matter which goes to which?). Thanks.
Last edited by Pacho : 07-10-2009 at 11:13 AM.
|