|
I used the Corvette Brakes from the 94 Vette on mine. I did reverse the rear calipers**RT is LFT and LFT is right** to make the mounting a little cleaner. Also, used the Vette spindles with the GA hubs welded to it. Have 1/8" spacers between the hubs and the rotors on the front to center the pads over the rotors. I have to drill my own bolt pattern into the rotors but having access to a dril press makes it a 20 min job, so not bad at all. With this set up there is no problem with the rims at all.
|