Quote:
Originally Posted by wws944
1.) Tie a piece of thin nylon or poly rope to one of the mirrors. Slide the rope under the seal - and across the bottom of the windshield under the seal.
2.) Position the corner of the cowl cover, opposite the side of where the rope was tied to the mirror, under the seal. The splined shafts for the wiper arms should be in their respective holes.
3.) Gently push the cover up under the seal while pulling the rope back across the top of the cover. Worked like a charm!
|
There is a MUCH easier way to put it back on....hold the cowl at an angle...put the piece that goes under the windshield in first (under windshield), push it in a little and it will fall into place. That easy! lol. No need to tie ropes to mirrors and all that jazz