Quote:
Originally Posted by guiguilandry
yeah I use my stock radiator, but aftermarket flexalite slim fans because of the headers, if you keep the stock exhaust manifolds you should be ok..
I don' think milzy has the engine mounts alerady made... ask them...
fot the a/c I don't know if the 3400 a/c compressor will bolt up to the 3800 or if the lines are the same... my alero was a 5 speed 2,4l at the begining...
if you already have a bigger exhaust you'll ony have to do a custom downpipe..
check zzperformance.com for all your 3800 stuff, they are the best with those engines..
|
http://youtu.be/EVw6Axxf7XU
Here's my YouTube channel with the 3400 setup I have now! Is the swap a bit easier from the 2.4 to the 3800 or 3.4L to the 3800.