Some pics from the Factory Service Manual and other to make it easier for the next person:
As you can see, the Factory Service Manual refers to it as an Inflatable Restraint IP Module (Passenger Inflator Module).
Here is the schematic which shows with fuses to pull:
They are on the left size door fuse panel:
Pull the G and K fuses:
Having said that, the Factory Service Manual says to only pull the Air Bag Fuse (the upper one of the two fuses, shown above, marked as G on the cover), but them mentions that you will see the air bag light on. I think if you pull both I mention probably not:
From the Factory Service Manual on how to physically remove and install the passenger side air bag:
As for how to remove the glove compartment (#2 above):
This fails to mention the 6 bolts holding it on (use 7mm socket), and then the electrical connector for the glove compartment light bulb.