|
Okay, a bit of useful information to add...
The two nuts on the two bolts that attach the strut tower to the knuckle (I believe that's the name of it) in the front are 21mm. In the back, they're 19mm. The nut at the top of the bearing plate that holds it onto the strut is 21mm. The hex head of the arm of the strut is 10mm.
You may be able to get the top nut off just with a 21mm socket. If you have trouble and have to hold the top hex head (10mm) with a wrench or vise-grip, then you'll need a 21mm open-end wrench too.
I only mention this because I happened to not have any metric sockets or wrenches larger than 19mm. This way you can see what you got and maybe make a tool run before you start.
|