[a4d2a0m]

they are super easy to install, you dont have to take the needles off, just slide the center hole over them.

I took apart my cluster and put tape on the backside of the overlays, went out to my car plugged in the open cluster left it on the steering column. slid a piece into place and turned on the car so I could line up the lights to the cut-outs, once it was perfectly alligned, i pressed it down to stick. You just have to turn the key off an on a few times.
It makes it very easy to look perfect with the lights on the cluster to line everything up.

I also put white paper over the warning light holes so it looks alot cleaner during the day.