Aleromod.com - View Single Post

07-10-2009, 02:54 AM

I'm hooking up a 30 amp relay with a 20 amp in line fuse. I'm looking at the diagram for the 25 amp relays, the 30 and 85 and 86 are messed up between my diagram.

According to your diagram: 87 goes to dark blue, 85 goes to pink, 30 goes to ground, and 86 goes to 12 volt power source (assuming a passenger headlight).

The diagram on the back of my relay box goes: 86 to negative trigger, 85 to 12 volt power source, 87 a not used, and I'm mixed up on what to put on 87 and 30 according to the diagram below (I know I have to put the blue and pink wire here but does it matter which goes to which?). Thanks.

07-10-2009, 02:54 AM	#6
Pacho Posts: n/a	Hooking up relay for having Hi/Low Beams at same time I'm hooking up a 30 amp relay with a 20 amp in line fuse. I'm looking at the diagram for the 25 amp relays, the 30 and 85 and 86 are messed up between my diagram. According to your diagram: 87 goes to dark blue, 85 goes to pink, 30 goes to ground, and 86 goes to 12 volt power source (assuming a passenger headlight). The diagram on the back of my relay box goes: 86 to negative trigger, 85 to 12 volt power source, 87 a not used, and I'm mixed up on what to put on 87 and 30 according to the diagram below (I know I have to put the blue and pink wire here but does it matter which goes to which?). Thanks. Last edited by Pacho : 07-10-2009 at 11:13 AM.