Quote:
Originally Posted by Dtilley
Ah! Alright, I get it. Where do I get these different cams, and all in all how much would all this cost?
|
Dude, you need to do research before you start buying this stuff. Do intake, header, exhaust first. Then worry about the rest. You can't simply just buy a cam and throw it in....you need to upgrade other parts if you want to put a cam in. It's NOT cheap and requires a tune. Focus on the easy mods first then start looking into cams, ported intake, etc.
The two places that make parts for our cars is milzymotorsport.com and wot-tech.com. Both guys know A LOT about our cars and make some quality parts. A header for the 2.4 can be found pretty much anywhere, along with an intake and exhaust. When you start getting into building an engine the best place to go is milzy or wot-tech. had to edit cause i'm not 100% sure that wot-tech or milzy mess around with 2.4s. I know they could if they wanted but their sites have nothing about 2.4's. They specialize in the 3.4s for our cars.