View Single Post
Old 05-27-2012, 07:33 PM   #17
PJGrandAm
GX Member
 
Join Date: Feb 2012
Location: Marysville, WA
Posts: 14
PJGrandAm is on a distinguished road


So I got the subframe down, now having trouble with the sway bar mounts. The passenger side one keeps spinning so I can't take the nut off. The bolt underneath isnt where the hole is on the subframe, so I can't just stick a socket in....

I also was able to get the subframe low enough without taking apart the suspension at all (e.g. knuckle bolts, tie rods, sway bar end links). I loosened the forward mount bolts and subframe bolts, and took out all the rear ones.

With all due respect, I a 21mm socket for those 2 forward subframe bolts as well and the nut on top of the passenger sway bar mount bolt is 10mm. I know this because I used a open ended wrench, the 3/8 didn't fit.

Last edited by PJGrandAm : 05-28-2012 at 01:31 AM.
PJGrandAm is offline   Reply With Quote