[mrbreezeet1]

The plastic bracket is busted up, and I don't want to pay $25.00 or more
for the plate.
I broke the red button off the switch too, so really I need that too.
But it still functions. (I lost the red button part so far, so can't glue it either)
I looked at the wiring, but I couldn't tell for sure, I see what looks like several switches inside the Hazard switch, (unless those are controlled by a relay, wishful thinking< I think.....lol)
What I was hoping is I just needed to jump two wires at the switch for the hazards to work, then I could just wire in a toggle switch, and zip tie the
hazard switch in there somewhere. I don't want to put the money into it right now, funds are real tight right now.
Of course, I don't really see how jumping 2 wires, could send power to all 4 corners of the car, so I take it the power is distributed at the hazard switch, not the multi function switch.
I might make a metal bracket, and plan it out, and zip tie the switch
to the bracket, or Go to the Pick and Pull junk yard, and take a chance?
I don't look forward to that junk yard either though, last time I went it was super muddy, and we have had lots of rain this past 2 weeks.
Thanks,
Anthony