[sburke]

Application Specifications Metric English
Balance Shaft Cover Nut and Bolt 13 N•m 115 lb in
Balance Shaft Driven Sprocket Bolt (left hand thread) 40 N•m + 45° 30 lb ft + 45°
Balance Shaft Housing Bolts 8 mm hex 10 N•m + 40° 89 lb in + 40°
Balance Shaft Housing Bolts 10 mm hex 15 N•m + 40° 11 lb ft + 40°
Balance Shaft to block Bolts 13 mm hex 25 N•m + 70° 18 lb ft + 70°
Balance Shaft to block Bolts 15 mm hex 53 N•m 39 lb ft
Balance Shaft to Block Bolts 18 mm hex 40 N•m + 60° 30 lb ft + 60°
Camshaft (exhaust) Rear Cover 14 N•m 124 lb in
Camshaft Position Sensor Bolt 10 N•m 89 lb in
Camshaft Sprocket to the Camshaft Bolt 70 N•m 52 lb ft
Connecting Rod Nuts 25 N•m + 80° 18 lb ft + 80°
Coolant Bleeder Valve Fully Driven, Seated , Not Stripped
Coolant Outlet to Cylinder Head 26 N•m 19 lb ft
Coolant Pump Cover to the Block 26 N•m 19 lb ft
Coolant Pump to the Coolant Pump Cover 14 N•m 124 lb in
Coolant Pump to the Timing Chain Housing 26 N•m 19 lb ft
Crankshaft Balancer to the Crankshaft 175 N•m + 90° 129 lb ft + 90°
Crankshaft Bearing Cap Bolts 20 N•m + 90° 15 lb ft + 90°
Crankshaft Position Sensor to Block 9 N•m 80 lb in
Cylinder Head Bolts Refer to Procedure
Cylinder Head Threaded Plug 26 N•m 19 lb ft
EGR Pipe to the EGR Adapter 26 N•m 19 lb ft
Engine Coolant Air Bleed Pipe 14 N•m 124 lb in
Engine Coolant Air Bleed Pipe Nut 42 N•m 31 lb ft
Engine Coolant Temperature Gauge Sensor to the Cylinder Head Fully Driven, Seated, Not Stripped
Engine Coolant Temperature Sensor to the Coolant Outlet 11 N•m 97 lb in
Engine Lift Bracket 96 N•m 68 lb ft
Engine Mount Bracket Adapter to Block Bolt Auto Trans 60 N•m + 60° 44 lb ft + 60°
Engine Mount Bracket Adapter to Block Bolt Manual Trans60 N•m + 60° 44 lb ft + 60°
Engine Mount (right hand side) to the Body Support Bolt 66 N•m 49 lb ft
Engine Mount (right hand side) to the Body Support Nut 44 N•m 32 lb ft
Engine Mount (right hand side) to the
Engine Mount Bracket Bolts 62 N•m 46 lb ft
Engine Mount Strut 100 N•m 74 lb ft
Engine Mount Strut Bracket Bottom Bolts 130 N•m 96 lb ft
Engine Mount Strut Bracket Front Bolts 66 N•m 49 lb ft
EVAP Canister Purge Valve Solenoid Bracket Bolt 8 N•m 72 lb in
Exhaust Manifold Brace to the Exhaust Manifold Bolt 56 N•m 41 lb ft
Exhaust Manifold Brace to the Oil Pan Nuts 26 N•m 19 lb ft
Exhaust Manifold to the Cylinder Head Nuts 15 N•m 11 lb ft
Exhaust Manifold to the Cylinder Head Studs 11 N•m 97 lb in
Exhaust Manifold Upper Heat Shield to the Manifold Bolts 14 N•m 124 lb in
Flywheel to Clutch Cover 20 N•m + 45° 15 lb ft + 45°
Flywheel to the Converter 66 N•m 49 lb ft
Flywheel to the Crankshaft 30 N•m + 45° 22 lb ft + 45°
Front Cover to the Timing Chain Housing 12 N•m 106 lb in
Fuel Pipe Bracket to the Camshaft Housing 15 N•m 11 lb ft +30°
Fuel Pipe to the Fuel Rail Nut 30 N•m 22 lb ft
Fuel Rail to the Camshaft Housing 26 N•m 19 lb ft
Ignition Coil and Module Assembly to the
Camshaft Housings 22 N•m 16 lb ft
Intake Manifold to the Cylinder Head Bolts/Nuts 24 N•m 18 lb ft
Intake Manifold to the Cylinder Head Studs 11 N•m 97 lb in
Knock Sensor 20 N•m 15 lb ft
Oil/Air Separator To Block Bolts 24 N•m 18 lb ft
Oil Dipstick Tube Bolt/Screw 8 N•m 71 lb in
Oil Filter Connector to the Block 29 N•m 21 lb ft
Oil Filter to the Block 3/4 to one complete turn after gasket contact
Oil Pan Bolts 24 N•m 18 lb ft
Oil Pan Bolts, Second Set 12 N•m 106 lb in
Oil Pan Drain Plug 26 N•m 19 lb ft
Oil Pan Studs 26 N•m 19 lb ft
Oil Passage Plug Bolt 30 N•m 22 lb ft
Oil Passage Plugs, 1/4x18 20 N•m 15 lb ft
Oil Passage Plugs, 3/8x18 30 N•m 22 lb ft
Oil Passage Plugs, Block 1/8x27 10 N•m 89 lb in
Oil Pressure Switch 14 N•m 124 lb in
Oil Pump Cover to the Oil Pump Housing - Short Bolt 10 N•m 89 lb in
Oil Pump to the Balance Shaft Housing - Long Bolts 12 N•m 106 lb in
Oxygen Sensor To Exhaust Manifold 42 N•m 31 lb ft
Powersteering Pipe to the Pump Nut 27 N•m 20 lb ft
Powersteering Pump to the Cam Carrier Bolts 26 N•m 19 lb ft
Rear Crankshaft Seal Housing to Block 12 N•m 106 lb in
Spark Plugs to the Cylinder Head 18 N•m 13 lb ft
Starter to the Block Bolt 90 N•m 66 lb ft
Tensioner to Tensioner Bracket Nut 54 N•m 40 lb ft
Throttle Body to the Intake Manifold 10 N•m 89 lb in
Thrust Plate to the Balance Shaft Housing 13 N•m 115 lb in
Timing Chain Housing to the Block Bolts/Studs 29 N•m 21 lb ft
Timing Chain Housing to the Camshaft Housings 26 N•m 19 lb ft
Timing Chain Tensioner to Housing and Block 10 N•m 89 lb in
Transaxle To Block Bolt 58 N•m 43 lb ft
Transaxle To Block Nut 66 N•m 49 lb ft
Transaxle To Block Stud 13 N•m 115 lb in