Aleromod.com - View Single Post

cherrington17 · 03-08-2006, 05:04 PM

nah, i've taken mine off a few times. (actually broken about half of them on each door)

even if you do break a few, it doesn't matter.. those screws hold it in there tight.

check this for pics... http://invision.aleromod.com/index.php?sho...c=13780&hl=door

personally, i just put a longer screwdriver under the far bottom corner of the door. there is a small gap in the vinyl down there. then just pry up and out slowly until you hear a loud "POP" then get a few fingers in there and slowly work your way around. give a few small tugs as you inch your way down, finding out where the rivets are. when you get to one, give it a swift pull and it should pop free.

03-08-2006, 05:04 PM	#9
cherrington17 Gone Join Date: Mar 2004 Location: Lockport Ny Posts: 19,244	nah, i've taken mine off a few times. (actually broken about half of them on each door) even if you do break a few, it doesn't matter.. those screws hold it in there tight. check this for pics... http://invision.aleromod.com/index.php?sho...c=13780&hl=door personally, i just put a longer screwdriver under the far bottom corner of the door. there is a small gap in the vinyl down there. then just pry up and out slowly until you hear a loud "POP" then get a few fingers in there and slowly work your way around. give a few small tugs as you inch your way down, finding out where the rivets are. when you get to one, give it a swift pull and it should pop free. __________________ Frequently Asked Questions ...You only stop learning when your dead...