Quote:
Originally Posted by worknprog.99
dude...
1. pop the 3 tabs off the side of the fender well plastic
2. take off the bolt for the plastic guards connection to the top plastic peice(right next to the last pushpin you pop out) 10mm bolt i believe
3. remove headlight if desired to have more light/arm room
4. remove all stock plastic air box piping, and the air box itself , 10mm bolts again i believe maybe bigger.
5. make sure all stock stuff is gone.
6. if running all the way from the throttle body remove the stock ruffled looking tube with the sensors (at least on the v6) add your coupler re hook the sensors.
7. eyeball and measure the route you wanna take to the fender well (filter sits right behind the plastic you have pulled back so its hidden when you put the pushpins and bolt back on.
8. get cone filter, install with clamp to the end of the tubing
9. let plastic fender guard cover fall back to place, re push in the push clips to the holes and bolt the 10mm bolt to connect the two pieces again
10. put headlight back in (if took off)
11. stand back and admire your handy work
if this doesnt help GTFO lol
|
so easy if you can't do it you should stop modding your car.