|
1
Enter your vehicle with your key and remote and shut the door behind you.
2
Press and hold the unlock tab on your driver's side door and be prepared to hold the tab through the following step.
3
Insert and remove the key from the ignition twice in a row and then insert the key in the ignition and leave it there.
4
Release the unlock tab on your driver's side door and wait for the vehicle to emit three beeping sounds.
5
Hold the unlock and lock buttons on your remote until the vehicle beeps again and release the buttons. Your remote will now be successfully programmed.
6
Repeat step five with any additional remotes and remove the key from the ignition to end the programming sequence.
|