Quote:
Originally Posted by worknprog.99
and as for the boost i will be running at around 8psi...
but with the boost controler i will be keeping it in between 6-8
are wastegates able to be adjusted to the desired psi within their range?
because mine is set at 8psi spring according to its specs
|
If your wastegate is set for 8psi, you cannot lower it below 8psi, you can only raise it. A boost controller can only raise the boost pressure from what the wastegate is set at. The only way to lower it is to get a different wastegate actuator (internal gate) or a different spring (external gate).