View Single Post
Old 02-12-2016, 12:02 PM   #8
shinnick66
GX Member
 
Join Date: Feb 2016
Location: Ca
Posts: 16
shinnick66 is on a distinguished road
I would say a press, but you can get the rubber out and then grind on the inside from top to bottom, not through all of it but as much as needed to hit the out side with a chisel and get it to fold in on it self. You can grind 180 deg apart or every 90 if needed. But sometimes you can get away with one grind.
shinnick66 is offline   Reply With Quote