[freakout]

Why not wire the inner tail lights to act as brake lights? I did a search didn't find anything on it, so here it is.

1. Go to a wrecking yard and get 2 sockets out of the main outer tail light.

2. Need to remove the inner tail light plug. If your sockets come out of an alero they should be coloured the same.

3. The wires are coloured like this; Black - ground, Brown - tail, Blue - brake.

4. I spliced into the wiring harnes on the driver's side, by the trunk hinge. This is where the harnes splits for the trunk.

5. Just need to run the blue wire to the lights to operate the brake.