Aleromod.com - View Single Post

05-27-2008, 06:20 PM

i have done this frank and it makes your job 10x easier if you remove the evap canister right in front of the fuel filter so you have room to put your arm up there and get the green piece off. 1 bolt holds on the evap canister (black box) and it slides out, then you have some room. Leave the screw fitting on because that's the stable side, i used a pocket knive and pushed on the side of the green piece (connector) and one side unhinged and then you push it out of the fitting and then unscrew the other side. Very easy when that canister is not in your way.

Edit: I read someone's post above about breaking the fitting, DO NOT BREAK THE FITTING, the fitting that came with my fuel filter didn't even fit on my v6.

05-27-2008, 06:20 PM	#9
Pacho Posts: n/a	i have done this frank and it makes your job 10x easier if you remove the evap canister right in front of the fuel filter so you have room to put your arm up there and get the green piece off. 1 bolt holds on the evap canister (black box) and it slides out, then you have some room. Leave the screw fitting on because that's the stable side, i used a pocket knive and pushed on the side of the green piece (connector) and one side unhinged and then you push it out of the fitting and then unscrew the other side. Very easy when that canister is not in your way. Edit: I read someone's post above about breaking the fitting, DO NOT BREAK THE FITTING, the fitting that came with my fuel filter didn't even fit on my v6. Last edited by Pacho : 05-27-2008 at 06:22 PM.