View Single Post
Old 04-02-2005, 09:10 PM   #29
tenny
 
Posts: n/a
that seems kind of silly to do that, your running a lot of wire for nothing!

put the LOC's behind the dash, and run the RCA's to the trunk, that way if you ever buy a different deck you've already got the RCA's run.

then take the LEFT front speaker and cut the wire, the deck side of the wire goes to the LOC, then the other side joins with the LEFT rear speaker after you cut it and connect the deck side to the LOC. What this does is connects the fornt and rear speakers together. Then go to the trunk and disconect the wires from the 6x9's and put an extension on them that goes to the amp for the front left output. That way you do not have to run any new speaker wires.
Then all you have to do is run the speaker wire from the amp to the subs!

that's by far the best way of doing it, dont run a speaker wire all the way to the back then to the front of the car again. Take advantage of what is already there.

Just do that for both speakers and you'll be set!

FROM CD
Speaker wire from deck -> LOC behind dash -> RCA's run to the trunk
Speaker wire from car -> splice front and rear together for each side, that gets you the wire to the trunk into your amp an dyour done!

if that does not make sense let me know and i'll draw up a wiring diagram for ya
  Reply With Quote