|
Yeah, it was a pain. I had to drill a small hole in the black plastic behind the mirror so the wires wouldn't show. Then I had to solder the wires from the LED to the lead wires and run it through the hole where the tweeter is, then down through the door and out through the black hose between the frame and the door.
I didn't have any luck splicing in to the wires on either the driver or passenger side right under the carpet, so I ended up running an extension of the lead wires to the 194 turn signal bulbs in the headlights and spliced into those.
My only problem now is, they only work when my lows are running, and they remain on all the time, but do blink when the corresponding turn signal is going.
__________________
Done lost my mind
|