Quote:
Originally Posted by [ion] C2
Little white plastic plug with an allen hole on the driver's side lower end of the radiator.
You put the allen wrench in, turn counterclockwise about 90 degrees, and pull the plug outward toward the front of the vehicle, and then coolant will drain from the bottom of the radiator out a hole underneath the white plug.
I just did this today.
|
First Sorry! for this old thread but used the search button & saw this thread...
Got the exact same plug & i am using a wrench + extension & turn the valve 1/4 tun (counterclockwise) than tried to pull the plug but it doesn't move even tried with plyers so i am stock can't drain the radiator
I don't want to pull out the lower hose because that is messy & 90% of the time you'll have to replace the hose because it will leak even with a new clips hose...
Anyhow any tips for the valve plug?
Thx!