Amp install, need help!!, stock HU
Hey guys I have the Monsoon system in my car and Im trying to add my amp and sub in. Right now I have a Boss BA-4000 4 channel amp, yes I know shitty for a sub but for now it should do, and an MTX sub. I have the amp wired for power with a remote wire and it turns on, green led comes on and seems to be getting power fine and everything. The problem seems to be the signal.
I bought a Stinger SLOC with L+R+L-R- inputs and a ground, hooked it into my monsoon wiring harness, to the correct wires off course, for the rear speaker, and ran my RCA's from it. Now, I turn on my car, play some music and NOTHING. No sound, no movement, nothing whatsoever form the sub. I just bought the sub right before I hooked it up so it is not blown, even tested it for continuity and OHMs just to make sure it is alright so that isnt the problem.
I took my multimeter and measured the output of the RCA cables coming from the SLOC and I only get 0.05 volts. Compared to the output of aftermarket decks of 2 and 4 volts this seems REALLY small. My only guess is that this voltage is too small and not enough signal is getting to the amp to be put out to the sub.
Has anyone ever had this problem before? Ive reconnected the LOC several times and the connection is fine but NOTHING.
If anyone has any idea about this, id appreciate it. I hear of lots of people using LOC so I know it works thats why i dont know why mine isnt. Thanks in advance.
|
Threaded Mode