Clear corners

[kingjames64]

oven trick worked awesome and corners are now cleared! I did realize one my lens' is very dirty and Im thinkin about replacing it... when my friend backed his truck up into my car the mechanic put on a new lens cover since it was cracked

But o well car looks 10 times better and i lost no money

[Corona_Rocket_alero]

the best thing to do is heat up the gray putty with a heat gun and clamp the lens back on and continue to heat it. the more clamps the best. then let cool. check out the picture

[sfi3400]

i got my right one done in 3hrs the hardest was getting it apart the chrome came of easy, the 2nd hard is clearing that grey beep from the housing chrome and clear. but tomorrow is my pass GREAT anyone wanna do it ill pay 30 bucks lol

[BlackJack]

tomorrow is your "pass" ? explain plz.

[wrestlingandrunning]

passenger side maybe?

[Ttop191]

lol $30 I'll do it

[TdotAlero]

Why would you do them separate ? It's much easier to do it in one shot. I have to go through the process again this time to actually remove the reflectors.

[jhubbz]

Ok, So I did this whole process yesterday and I got pretty good results. I also painted my bezels black. A couple things I would like to point out though:

1. Do the oven trick. Don't question it, just do it.

2. I figured cleaning off the bezel with alcohol after sanding (just like tinting tails) would be a good idea. Wrong. I got a weird bubbly pattern after I sprayed it. I sanded it down and its better now, but still looks odd. I had better luck with the other bezel. I sanded and painted without an alcohol wipe down, just a dry towel.

3. Rustoleum for plastic works great! No adhesion promoter needed, We will see down the road how well it really worked.

4. This is my main point!! The freezer trick did not work that well for me. I left it in there at first for 10 mins, then again for 20. It just would not come out that easily. Instead I popped it back in the oven for about 5 mins and ran a screwdriver down the groove and mostly all of it came out. It was kinda messy but it worked well.

[Cashdollar2009]

^^^^^ Thanks for the tips! I'm hoping to tackle mine here soon as well. Hmm... I probably would have made the alcohol assumption for the bezels too.

[Alerojester]

i still haven't gotten mine done and they are sitting in the back of my wifes SUV i guess I'm just being too damn lazy to do it but i will eventually get them done if i have to force myself to do it or just go out and let them sit in the sun for awhile then pry them apart, idk i will see what comes out of this

[jhubbz]

Ok, so my gf has been inspired by all the crap I do to my car, and I will be clearing her G6's corners tomorrow, along with painting the bezels the body color. I was looking around on one of the G6 forums and some guy sprayed his corners with nightshades, which isn't a bad idea.

I guess if you want a somewhat different look, you can do that. It will still light up amber, but just not as bright im assuming. Legality issues maybe? IDK if the amber has to be fully/clearly visible?

Here's what they look like without flash:



And with flash:



Just thought I would share my research on the topic.