Aleromod.com Aleromod.com

Go Back   Aleromod.com > Aleromod Bazaar > The Bazaar - For Sale

Reply
 
Thread Tools Search this Thread Display Modes
Old 07-02-2017, 01:36 PM   #1
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
3400/3500 hybrid with RSM SC kit for sale


Is there any interest on this forum for a built 3400/3500 hybrid
with an RSM SC Kit.
The engine is a new build
The RSM Kit was used for 2 years

Engine:

Bored 0.030
Block, Oil Pan , Lower Intake, waterpump housing , Valve Covers all coated with Eastwood Ceramic Coatings

ARP Studded block by Christopher Alan, on Flickr

TCE double Roller

TCE double roller 2 by Christopher Alan, on Flickr

MMS Stage 2 SC cam
ARP rod cap bolts
New Hyper .030 pistons
Total Seal Gapless rings
New Oil pump

Parts by Christopher Alan, on Flickr

Upgraded LS lifter springs

Lifter spring upgarde by Christopher Alan, on Flickr


TOP END 3500

MMS Stage 2 heads
Cometic MLS Viton Head Gaskets
ARP Head studs

MMS Stage 2 heads by Christopher Alan, on Flickr
Polished Stage 2 MMS by Christopher Alan, on Flickr


TCE Billet 65mm TB

TCE TB by Christopher Alan, on Flickr

Upgraded Felpro metal upper and Lower intake manifold gaskets
36lb Fuel Injectors, harness modified

EGR delete TIG smoothed not just blocked off

EGR delete by Christopher Alan, on Flickr

RSM Billet Crank Pulley(also have the Alt Pulley

Crank pulley by Christopher Alan, on Flickr

Header Flanges and mandrel tubes in kit form for headers(S&S) as well as a set
of stainless headers(OBX) I was going to adapt to a W body.....all new

Plus a ton of extras...ie...injectors,valve covers,coil packs, injector rail.........

Engine 4 by Christopher Alan, on Flickr

Engine 2 by Christopher Alan, on Flickr

Engine 3 by Christopher Alan, on Flickr

RSM Kit

P1010001 by Christopher Alan, on Flickr

This picture has an ECU, 2 FMU's, and MSD System that IS NOT INCLUDED as they are long gone.

THis is all off the top of my head and I am certain that I have left out something but you get the idea.

I can go into detail with anyone who might be interested in all or part.
Thank you
Chris

Last edited by BlackV6 : 07-04-2017 at 03:19 PM. Reason: Adding photos
BlackV6 is offline   Reply With Quote
Old 07-02-2017, 08:11 PM   #2
tw0123
OSV coming soon!!!!!
 
tw0123's Avatar
 
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,292
tw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond repute
Sounds like a good build... Why are you selling and what's your price of everything, and would you consider separating the sc from the motor?

Last question and possibly the most important... Pictures?
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
tw0123 is offline   Reply With Quote
Old 07-03-2017, 11:24 AM   #3
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
Quote:
Originally Posted by tw0123 View Post
Sounds like a good build... Why are you selling and what's your price of everything, and would you consider separating the sc from the motor?

Last question and possibly the most important... Pictures?

I'm selling because the Monte Carlo is also for sale and I don't want to spend the time and more money dropping it in the car
I'm liquidating everything and going back to an old school 383 stroked 1985-1987 Monte Carlo .

I'll post pictures later I'm in the process of gathering a file together.

The build was done top notch with Mike Miller advising.

I would consider selling the SC kit but the build was designed around it .

Mike and I have also discussed parting out the engine which is a thought but I'd have to get commitments on the major pieces before I'd do that.

This has been a hard decision to make and that's why I'm posting this up to the forums to see what interest I get

Thanks for your response, I'll post pictures later today
BlackV6 is offline   Reply With Quote
Old 07-04-2017, 12:48 AM   #4
tw0123
OSV coming soon!!!!!
 
tw0123's Avatar
 
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,292
tw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond repute
I get it totally!!! It sucks when you come to that point, but it's hard to beat old school over new school lol...

Has the rsm charger ever been rebuilt or had the known reliability issues addressed?

What price are you looking to get for everything, either together or (worst case) each piece?

I know someone who is looking for a charger but if you could find a buyer for everything go for it!!!
( my car is at the max for what my wife will let me buy, but i always keep my eyes out for my buddy's lol)
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
tw0123 is offline   Reply With Quote
Old 07-04-2017, 08:07 AM   #5
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
Looking to get 4K for everything,

3K for the engine and all the extras I have in the garage... which is a lot.

1.5K for the Charger

Of course an immediate buyer can negotiate.
Bottom line is they need to go so I'm motivated.

The problem with the RSM Shaft bearing has been addressed. They put a cheap 305 bearing on the pulley side , and after a failure and shaft replacement that was corrected immediately.
I'm all ears for parting out the lot but I would like some commitment before that happens. I'm even willing to truck it to the buyer as long as it's not too far
I'm not n Central Florida.
This would really transform any Alero, GrandAm, J Body, Monte Carlo.
Even kit cars such as the Arial Atom are using the 3400
Thanks for looking

Last edited by BlackV6 : 07-04-2017 at 08:25 AM.
BlackV6 is offline   Reply With Quote
Old 07-04-2017, 08:20 AM   #6
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
If there are any other sites you guys would recommended to post this on , I would appreciate the suggestions. I've been out of the loop for sometime but I do know that multiple formats use this power plant and there may be a buyer out there that just dosnt know it available.
Again.... any help would be greatly appreciated

Last edited by BlackV6 : 07-04-2017 at 08:21 AM. Reason: Grammar
BlackV6 is offline   Reply With Quote
Old 07-04-2017, 05:08 PM   #7
tw0123
OSV coming soon!!!!!
 
tw0123's Avatar
 
Join Date: Jun 2006
Location: lindsay, ontario
Posts: 2,292
tw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond reputetw0123 has a reputation beyond repute
As much as i hate to say this... I truly love this forum, but as you can tell there isn't much activity these days... Unfortunately Facebook has taken over...

Oldsmobile alero owners
Grand am enthusiasts
60*v6
Z24forum.com

Those are a bunch of the Facebook groups that i know of, that's how i found the one guy i know that's interested in the charger...
If you want to pm me your email address i could send him the message to email you so you guys can talk directly...

Your price is very reasonable for what you've got and think the right buyer will appear but unfortunately most of the members on Facebook are kids with no disposable income... But ya never know until you make the post and see what happens haha!!
__________________

Misty: 3400, S&S headers, TCE 65mm TB, CAI, 180* TStat, Milzy motor & tranny mount, 18" BOSS 328 & much more... going osv!!
Silver: 2.4L, 5 speed, GAGT seats, front & rear STB's, all red tails, led headlights, Magnaflow muffler, Milzy Motor mount, WAI, Cosmo short shifter; sold n missed
Tequila: 2.4L, GA interior swap, scrapped...
tw0123 is offline   Reply With Quote
Old 07-06-2017, 12:32 AM   #8
01GrandAm
GX Member
 
Join Date: Aug 2006
Location: Indiana
Posts: 74
01GrandAm is on a distinguished road
Hey Chris, it has been a long time.

Your kit is setup for a W-body, as the supercharger mount is for the 4t65e transmission and dog bone engine mount. Because of this, it will not be a direct mount for a N-body. If I remember correctly the drive shaft was a few inches longer on your kit vs the RSM N-body kits.

The sad story with the 60v6 cars is that every has pretty much died out. Not many of the original guys are around and it seems all of the newbies have turned to Facebook. You might get someone to bite on the supercharger, however the engine is going to be a tough sell as most aren't going to have a clue what it is.

Not sure if you remember AleroB888, but sadly he is also looking to sell his White Alero with built motor and m90 kit.
01GrandAm is offline   Reply With Quote
Old 07-06-2017, 05:45 AM   #9
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
Hey man , it has been a long time.
I am finding that the boards are not as active as in the past.

My kit was designed around the W body with
the 4T65e tranny.

Not sure of shaft length , but if the car has a 3400 and a 4T65e tranny
This kit should work just fine as the mount supplied bolts to the block no need to connect it to a dog bone .

It's good to hear from you
Hope all is well my friend
BlackV6 is offline   Reply With Quote
Old 07-23-2017, 01:47 AM   #10
fisdad
I do what I want to Sheep & Goats
 
Join Date: Feb 2011
Location: Uranus
Posts: 851
fisdad fisdad fisdad fisdad fisdad fisdad fisdad fisdad fisdad fisdad fisdad
I am very tempted with this. What part of Florida are you in? I'm assuming that this engine and all is drop in ready based on the photos.
__________________
My screen name should be changed to Jizzdaddy. I was anally raped by flying monkeys and loved it. I promise to never threaten anyones daughters again because I know it will result in my ahoe being severely widened. - Did Andy just say that he wants to fk my ahoe... ewww. Sorry old man, but you're not my type.
fisdad is offline   Reply With Quote
Old 07-28-2017, 04:00 PM   #11
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
Quote:
Originally Posted by fisdad View Post
I am very tempted with this. What part of Florida are you in? I'm assuming that this engine and all is drop in ready based on the photos.

Im in Central Florida (Deltona)

The engine is ready to drop......needs alt,starter,PS pump swapped over
all brackets is there for the ancillary stuff.

Have coil packs and UIM, TB that stuff.

The idea was to swap all that off the 3400 thats in the MOnte Carlo.

cheap enough new or used for the small stuff

Im at 386 801 6430 if you have any more questions

Chris
BlackV6 is offline   Reply With Quote
Old 07-28-2017, 04:37 PM   #12
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
Quote:
Originally Posted by fisdad View Post
I am very tempted with this. What part of Florida are you in? I'm assuming that this engine and all is drop in ready based on the photos.

Florida discounts will apply at checkout
Just sayin
BlackV6 is offline   Reply With Quote
Old 11-12-2017, 10:19 PM   #13
BlackV6
GX Member
 
Join Date: Sep 2010
Location: Florida
Posts: 39
BlackV6 is on a distinguished road
Ive decided to break the engine up and sell off the RSM Kit, The top Swap and the block with new pistons and double roller.......any offers PM me
Have a great day
BlackV6 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:22 PM.


Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.