Cai

[02AleroEco]

Right now i have a pieced together WAI. But in the very near future i am going to put in a CAI.

Now how do i remove that stock crap thats in the fender. And for the sensor thats in the stock tude, did you guys all move that closer to the filter in the fender? or is it fine where it is on the new pipe

[lord2heart]

think theres clips and such that holds the fender in which you can see around the wheel well?. there also should be a hole predrilled on the tubing where you can stick the probe in. if it doesn't, just drill one. i'm not really sure if it matters if the sensor needs to be close to the engine or away, i have mine right before the TB. somebody can chime in on that

[02AleroEco]

i know about the wheel well, but isnt there like stock plastic crap thats right behind the fender lining, thats held by bolts or something?

[Nate's Alero]

Originally Posted by 02AleroEco

i know about the wheel well, but isnt there like stock plastic crap thats right behind the fender lining, thats held by bolts or something?

bolts and christmas tree looking things

[whiterider00]

lots of them. and you need 5 year old hands to get to them with any ease. have fun. and the stock intake tubing goes from down by the foglight, all the way up to the top of the wheel well. i tried cutting it up so it was easier to remove, but that didnt work. just be patient and it should come out eventually.

[Cliff8928]

I got all mine out in one piece just fine. It helps to remove the wheel, wheel liner and loosen up the bumper so it can move forward a bit. That sounds like a lot to do, but it's really pretty easy.

[Fenderxcore]

Originally Posted by Cliff8928

I got all mine out in one piece just fine. It helps to remove the wheel, wheel liner and loosen up the bumper so it can move forward a bit. That sounds like a lot to do, but it's really pretty easy.

qft...took me about an hour an a half for full install