real quick

worknprog.99 · 02-23-2009, 06:38 PM

what size of amp would i need to power only 1 1000w sub??
recomendations?

ryanJ · 02-23-2009, 07:47 PM

What sub, how many voice coils, how many ohms? Im selling an Infinity amp for cheap that could work

alerocar01 · 02-23-2009, 08:08 PM

don't want to do the math but, i would say 900W and lower would work so you don't blow your speaker.

worknprog.99 · 02-23-2009, 09:54 PM

Quote:

Originally Posted by ryanJ

What sub, how many voice coils, how many ohms? Im selling an Infinity amp for cheap that could work

how much for it??
i need to know soon cause im bidding on one on ebay thats ending soon... its for 2 fenwood 10s and the corresponding kenwood amp

worknprog.99 · 02-23-2009, 09:55 PM

Quote:

Originally Posted by alerocar01

don't want to do the math but, i would say 900W and lower would work so you don't blow your speaker.

cant you tune the amp down?? i know little about this stuff lol

guiguilandry · 02-23-2009, 09:57 PM

WOW I didn't knew that FENWOOD did sub....

worknprog.99 · 02-23-2009, 10:01 PM

dont matter didnt win....

so how much for that infinity amp?? i will probably only run one 10 maybe 2

AleroDrime · 02-23-2009, 10:02 PM

the max dont matter whats the rms, match the rms adn ohm responce

worknprog.99 · 02-23-2009, 10:02 PM

Quote:

Originally Posted by guiguilandry

WOW I didn't knew that FENWOOD did sub....

lol i was typing fast hahaha i meant kenwood

worknprog.99 · 02-23-2009, 10:04 PM

i assume these are the stats for both?? the auction is for 2....

# 10" Power Subwoofer

4-Ohm, Single Voice Coil
#

Rated Input Power: 300 Watts (each sub)
# Peak Input power: 1200 Watts (each sub)
#

Frequency Response: 30Hz-1000Hz
#

Sensitivity: 90dB

worknprog.99 · 02-23-2009, 10:12 PM

what you guys think of this? again not looking to blow my trunk off lol

http://www.parts-express.com/pe/show...number=267-085

meadus101 · 02-23-2009, 10:14 PM

If you're going with 2 of those pyle's, You'd be Set.

Ryan suggested a ZX300.1 by Kicker to push my 300w JBL Sub.

It's amazing. The amp is a champ, and they're underrated, My certificate has it rated for 384.

So if you could find a 2 channel amp by Kicker to run two of those 150's, it would be good.

Or you could go with a 1 Sub setup. if that's the case, I'd go with 300 RMS. it gives you the extra pump if you need it, but regularly, it's just perfect for the little bump to take the buzz out of your speakers.

Ghadsphi · 02-23-2009, 10:14 PM

Quote:

Originally Posted by AleroRacing

the max dont matter whats the rms, match the rms adn ohm responce

^^^^^^^^ This guy ^^^^^^^^^
I dunno what I'm talking about but I do know you want something probably just below the RMS. I don't know the min you can throw on it though. All my research and search skills have convinced me that if it doesn't say RMS then you better find it out and google it.

worknprog.99 · 02-23-2009, 10:21 PM

Quote:

Originally Posted by meadus101

If you're going with 2 of those pyle's, You'd be Set.

Ryan suggested a ZX300.1 by Kicker to push my 300w JBL Sub.

It's amazing. The amp is a champ, and they're underrated, My certificate has it rated for 384.

So if you could find a 2 channel amp by Kicker to run two of those 150's, it would be good.

Or you could go with a 1 Sub setup. if that's the case, I'd go with 300 RMS. it gives you the extra pump if you need it, but regularly, it's just perfect for the little bump to take the buzz out of your speakers.

thanks man... i probably will go with just the one pyle...
whats the rms? (i know guys its probably obvious but i have never delt with suns and stuff before lol) go easy on me haha

bonez1203 · 02-23-2009, 10:39 PM

look into RE subs and rockford amps.
i have a RE SE 15" dvc in a 4 cu ft ported enclosure and a rockford t1000-1bd
i got the sub and amp on ebay
just my 2cents

worknprog.99 · 02-23-2009, 10:42 PM

Quote:

Originally Posted by bonez1203

look into RE subs and rockford amps.
i have a RE SE 15" dvc in a 4 cu ft ported enclosure and a rockford t1000-1bd
i got the sub and amp on ebay
just my 2cents

lol sounds kinda pricey

bonez1203 · 02-23-2009, 10:46 PM

they can get that way but look into RE 10" and a 500 watt amp. i know you can buy the rockford 500 watt amp at bestbuy and other retail stores for pretty cheap try and stay away from pyle and things like that you get what you pay for in car audio

worknprog.99 · 02-23-2009, 10:48 PM

Quote:

Originally Posted by bonez1203

they can get that way but look into RE 10" and a 500 watt amp. i know you can buy the rockford 500 watt amp at bestbuy and other retail stores for pretty cheap try and stay away from pyle and things like that you get what you pay for in car audio

even tho im not looking for competition like performance? lol
or 100% stay away from them?

worknprog.99 · 02-23-2009, 10:52 PM

Quote:

Originally Posted by bonez1203

they can get that way but look into RE 10" and a 500 watt amp. i know you can buy the rockford 500 watt amp at bestbuy and other retail stores for pretty cheap try and stay away from pyle and things like that you get what you pay for in car audio

would 50$ for an RE 10 a good deal if so i am going to buy it it looks nice
and 60$ for an RE 12???

which would you buy??

bonez1203 · 02-23-2009, 10:54 PM

i have used pyle, crunch ect.. in the past and ended up unhappy with sound quility and the quilty overall
mtx is good
check out
ebay Item number: 360125921673