Aleromod.com Aleromod.com

Go Back   Aleromod.com > General Help > Common Questions & Troubleshooting

Reply
 
Thread Tools Search this Thread Display Modes
Old 05-04-2005, 12:59 AM   #1
ryanthefizz
GL Member
 
ryanthefizz's Avatar
 
Join Date: Apr 2005
Location: WI
Posts: 242
ryanthefizz is an unknown quantity at this point
any way to open the rearview mirror so i can get the 194 lights out easier? or do i just have to yank on them with a needle nose?
ryanthefizz is offline   Reply With Quote
Old 05-04-2005, 01:57 AM   #2
AleroBloke
 
Posts: n/a
I'm not trying to whore, but I wanna know if i can do this and spray some foam hardening shiz in the mirror area to stop it from making noise when i bump bump bump.
  Reply With Quote
Old 05-04-2005, 09:54 AM   #3
Caffineboy
 
Posts: n/a
^^exactly!!!!
  Reply With Quote
Old 05-04-2005, 10:00 AM   #4
ryanthefizz
GL Member
 
ryanthefizz's Avatar
 
Join Date: Apr 2005
Location: WI
Posts: 242
ryanthefizz is an unknown quantity at this point
whore away
ryanthefizz is offline   Reply With Quote
Old 05-04-2005, 11:23 AM   #5
noodle
 
Posts: n/a
Yse you can. Take it off the mount by unscrewing the screwand sliding it up. Unplug the wires for the lights if you have the map lights in the mirror. you will notice a small gap like space going around the outeredge of the mirror marking where the 2 halves come together. Take a flathead screwdriver and pry the 2 pieces apart. Be careful mine was alittle tight and tough. Once done with whatever you're doing in there just snap the 2 halves back together and remount on the windshield.


although just pulling the bulbs with a pair of needlenose is alot easier.
  Reply With Quote
Old 05-05-2005, 12:17 AM   #6
ryanthefizz
GL Member
 
ryanthefizz's Avatar
 
Join Date: Apr 2005
Location: WI
Posts: 242
ryanthefizz is an unknown quantity at this point
upon close examination and lots of prying i determined that if you have a rear view mirror that has map reader lights in it dont try and seperate it, i think it is impossible. however i did discover that the bulbs are not screwed in on a little mount like the 194's in the doom light, these bulbs however are just in little clips, if you stick a small flat head screw driver in the little gap in the shinny are around the bulb the bulb will come flying out with a little pressure.
ryanthefizz is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 04:41 AM.


Powered by vBulletin Version 3.6.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.