Just a bit of an update

DOHC_tuner · 06-06-2008, 11:14 AM

i got my pulley in......talk about fast shippping....just took 3 days

And added some chrome bolt covers

can you see my header?

Trickyslick · 06-06-2008, 11:27 AM

Cant wait to see the beast in action....

[ion] C2 · 06-06-2008, 11:27 AM

get it running already

what else do you need to do

AGT · 06-06-2008, 11:30 AM

Pulley is nice

DOHC_tuner · 06-06-2008, 12:36 PM

Quote:

Originally Posted by [ion] C2

get it running already

what else do you need to do

I was waiting for someone to ask that exact question.

All thats left as as follows in exact order:

-install crank pulley with new serpentine belt

-buy 2.4L stage two intake to add to 3400 air intake to complete cold air intake, then install

-buy new battery

-drop gas tank remove old gas and have the tank cleaned

-buy 6 qts of synthetic oil and install....run for a bit then drain.

-buy and install new high flow cat and muffler

-paint car

-get rims

billytheman1188 · 06-06-2008, 12:39 PM

soooo exactly how much power do you think your going to put out?

[ion] C2 · 06-06-2008, 12:44 PM

not much more than stock he really didn't do much to upgrade the power as far as i know, just made it capable of handling more power

DOHC_tuner · 06-06-2008, 01:08 PM

It will run a lot better and faster than stock I can bet you that much.

BUT it was built to handle much more. I plan to boost the hell out of it down the road but first my primary goal is to break it in.

Blender345 · 06-06-2008, 04:12 PM

Let us know how the boost goes.. where are you getting the boost from? Make sure you get a BOV

lol...

DOHC_tuner · 06-06-2008, 06:07 PM

well it will be a while but I plan to run a garret

Blender345 · 06-06-2008, 06:09 PM

not that I know what that is but I've seen others talking about garret, must be a cool guy (just kidding). But yeah I just wanna do little things to my car like this intake. Is there anything else that would increase performance without costing more than a couple hundred? I am trying to learn about headers and if they're worth getting.

cherrington17 · 06-06-2008, 06:12 PM

lookin pretty nice dohc. keep us posted.

DOHC_tuner · 06-06-2008, 06:16 PM

Quote:

Originally Posted by Blender345

not that I know what that is but I've seen others talking about garret, must be a cool guy (just kidding). But yeah I just wanna do little things to my car like this intake. Is there anything else that would increase performance without costing more than a couple hundred? I am trying to learn about headers and if they're worth getting.

sounds like you need lots of help...just ask and I'll be happy to help

but your looking to spend a bit over a 100 right?

Blender345 · 06-06-2008, 10:31 PM

bit over 100 for what? headers? I just want my car to have a bit more hp (hence why I bought a wai) plus it was cheap 40 bucks. I mean I am willing to spend a few hundred, but my father doesn't want me going all out because he feels like it can crap out anyday with the 150k miles it has. I know it is my choice in the end and I will base it off of how my car does after I put certain things on it, which I am not to sure of what to do to it yet. But yeah any tips or anything you recommend would be greatly appreciated. I want my car to run mint and I want to hear my baby purr like a.... lion. lol. But I know you guys are pro's (well I consider you guys to be pro's, some of you) and that's why I am asking for tips on little things I can do to work my way up. Like if I buy something such as a header, I want to know how much it is and what it will do (increase hp, mpg, whatever else) like my intake which should be in tomorrow. Can't wait. I appreciate your patience with me also.

whiterider00 · 06-06-2008, 11:57 PM

ive seen headers for around $130, or less some places. not sure on the specs, but itll add some power, anything is an improvement on stock. if you do get header tho, you gotta get the whole exhaust redone, cuz its 2.5" pipe on the header, and stock is 2.25 i believe. theres a place near me thatll do a whole custom exhaust for my car probly around $200, not including header and muffler, so pricewise it isnt too bad. i would suggest a borla muffler (they make universal ones)because on the 2.4 it sounds good, without being loud or sounding like a bee in a coffee can. look up some sound clips for different types of mufflers, thats what made me decide which one to get. good luck with the car, and keep us updated.

Spilner521 · 06-07-2008, 10:41 AM

Quote:

Originally Posted by DOHC_tuner

It will run a lot better and faster than stock I can bet you that much.

BUT it was built to handle much more. I plan to boost the hell out of it down the road but first my primary goal is to break it in.

It'll be a bit quicker than stock, but if you're expecting it to be a rocket, you're going to be disappointed.

Are you using lower, higher, or stock compression pistons? I forgot exactly what you put in there.

Get it broken in and get it boosted, that's when it'll really push you back in your seat.

cherrington17 · 06-07-2008, 11:27 AM

Quote:

Originally Posted by Blender345

bit over 100 for what? headers? I just want my car to have a bit more hp (hence why I bought a wai) plus it was cheap 40 bucks. I mean I am willing to spend a few hundred, but my father doesn't want me going all out because he feels like it can crap out anyday with the 150k miles it has. I know it is my choice in the end and I will base it off of how my car does after I put certain things on it, which I am not to sure of what to do to it yet. But yeah any tips or anything you recommend would be greatly appreciated. I want my car to run mint and I want to hear my baby purr like a.... lion. lol. But I know you guys are pro's (well I consider you guys to be pro's, some of you) and that's why I am asking for tips on little things I can do to work my way up. Like if I buy something such as a header, I want to know how much it is and what it will do (increase hp, mpg, whatever else) like my intake which should be in tomorrow. Can't wait. I appreciate your patience with me also.

nice thing out the older/abused car, is as things break down, you can replace them w/ performance parts... cuz heck, its gotta get replaced anyway.

but yeah, i'd save the higher end engine work for a new engine.

DOHC_tuner · 06-07-2008, 01:10 PM

Quote:

Originally Posted by Spilner521

It'll be a bit quicker than stock, but if you're expecting it to be a rocket, you're going to be disappointed.

Are you using lower, higher, or stock compression pistons? I forgot exactly what you put in there.

Get it broken in and get it boosted, that's when it'll really push you back in your seat.

ofcoarse i didnt expect it to be a rocket....that'll come once I ready to add the boost. this is just preparation time and plus the funds are not there yet for the project so Im just getting ready. Lots of things going on in my life right now but i still find time to work on my car

Im running low comp pistons so yeah a loss there but they arent far low comp compared to stock compression.

spyhunter · 06-07-2008, 04:17 PM

boost it soon.

DOHC_tuner · 06-07-2008, 04:25 PM

Oh you dont know how bad I want the shhhhhh coming from the BOV