Taylor 8mm Spiro Pro Spark Plug Wires

billytheman1188 · 06-09-2006, 10:34 AM

Store/Site purchased:www.pfyc.com
Cost/Shipping:around $52 including shipping
Store service, contact, delivery, problems, props:VERY FAST shipping. no problems, i didnt really contact them so i dont know how it is.

Initial product impressions, quality:Great quality!!!
Instructions, good, bad, none, etc:GOOD(N/A)
Installation notes, easy, hard, PITA:EASY
If not self installed, cost of installation:N/A

Performance, appearance opinions:I noticed a big difference in the response when i push the pedal down. It doesnt hesitate that much anymore.

Any other thoughts about the product:They look real nice under the hood!!

Has anyone else noticed a BIG DIFFERENCE in their cars after putting sparkplug wires in???????

06-15-2006, 10:52 PM

I have 8.5mm MSD wires in and i think they are great. I am going to be swapping them out for new ones soon though.

CiscoPath · 12-19-2006, 09:20 PM

Installed my Taylor plugs this weekend. Unfortunately, I also had to put it in the shop today due to other engine issues, so i haven't gotten the chance to see what they can actually do.

Seaaan · 03-09-2007, 06:18 AM

Sorry I dont know much about car stuff yet lol, but can these taylor 8mm spiro pro spark plug wires be used with NGK iridium spark plugs? Does it matter which wires are used with which plugs?? Because I think im going to go to autozone and purchase those when I get the chance.. :P

Redog · 03-09-2007, 12:04 PM

^^ Yeah the ingition wires can be used with any plugs

Seaaan · 03-09-2007, 10:12 PM

Quote:

Originally Posted by Redog

^^ Yeah the ingition wires can be used with any plugs

thanks sorry for being a noob lol

03-09-2007, 11:11 PM

No perceivable difference here.
I've used stockers, Taylors, MSDs, an Magnecors. Stockers work fine and are in use now.

Seaaan · 03-10-2007, 12:05 AM

i went to buy spark plugs and wires today and the only thing they had left in stock at pepboys was champion iridium spark plugs hope those are okay? and when they looked up my car they said there arent spark plug wires for my car, but coils?? is that right?? cuz i bought them...i have a 2000 alero 2.4L

Seaaan · 03-10-2007, 12:09 AM

okay i dont get it lol... i looked it up and i found spark plug 'wires' for my car and i also found 'ignition coils' and it said wires are not required for this setup...so could i do it either way??

Jferg2223 · 03-10-2007, 01:18 AM

I have had my taylors for about 15,000 and man do I love them perfect match with NGK Iridiums and MSD coils

pawzbear · 03-10-2007, 03:36 AM

yeh i was under the impression our cars didnt have 'wires'
but hey what do i know?

Seaaan · 03-10-2007, 04:47 AM

im not sure but i guess mine uses coils uhh is it different for the different models/engine sizes?

Jferg2223 · 03-10-2007, 01:09 PM

all gm cars from like 98 on use the same coils

Cliff8928 · 03-10-2007, 01:18 PM

Quote:

Originally Posted by Jferg2223

all gm cars from like 98 on use the same coils

No, they don't... but either way the coils on the V6 have been used on *most* of the FWD V6s since '87. also on the Northstar, ZR1 Corvette, and a couple other cars if i remember that one right.

It's the 4-cylinders that don't have wires. (Any in the Alero that is)

Jferg2223 · 03-11-2007, 01:40 AM

Quote:

Originally Posted by Cliff8928

No, they don't... but either way the coils on the V6 have been used on *most* of the FWD V6s since '87. also on the Northstar, ZR1 Corvette, and a couple other cars if i remember that one right.

It's the 4-cylinders that don't have wires. (Any in the Alero that is)

i pretty positive OTHER THAN 4 cylinders use the same coils and v8's have one more but they are the same coil

Seaaan · 03-11-2007, 01:48 AM

hmm i just had my champion iridium spark plugs and coils put in... when started up and at low rpms the car makes a deeper sound [i like it actually], but im smelling a good amount of fuel smell at start up and while driving [letting air in] is something wrong with that picture any possible problems? or is that normal :P?

Cliff8928 · 03-13-2007, 01:41 AM

Quote:

Originally Posted by Jferg2223

i pretty positive OTHER THAN 4 cylinders use the same coils and v8's have one more but they are the same coil

Ok.

The 3400 uses the Delco 2-tower coil. Even in 1998 the V8s (northstar aside) either used one coil per cylinder (LS1) or ONE coil total and still had a distributor (trucks, also 4.3 V6). The 3.5 DOHC V6 has it's own specific coil and module assembly as well as the Catera having it's own bosch 6-tower coil. The 2200, 3100, 3400 and 3800 used the same delco 2-tower coil as well as the northstar (until 2000-2001 when it went coil-on-plug)

CBLOHM3400 · 12-13-2007, 03:43 PM

Has anybody bought ac-delco plugs latley the ones that i bought about three days ago has ngk stamped on the hex part on the plug (what the sockek goes on to tighenten up) also ac plugs are irridium per what the computer at autozone says

Redog · 12-13-2007, 03:47 PM

Standard AC Delco's here, everything else effs my car up.

I also have the Accel xtreme 9000 wires in my car. Not bad I like them a little bit better than the Taylors. They are black wires and 8mm also

BlackJack · 12-13-2007, 04:39 PM

love the enthusiasm for performance ignition products.....but guys, please remember, if you're not making high horsepower, there's much better things you could spend your money on. The closer your car is to stock engine, the less benefit you get from performance ignition products.