Where to find metal part of motor mount

ndkpyro · 02-20-2013, 09:58 PM

Hello everyone. My right side motor mount is cracked (the metal part not the damper) Anyone know the part number for it or where I can find one. All I find is the damper itself.
Thanks
http://static.summitracing.com/globa...ani-2933_m.jpg

sleepyalero · 02-20-2013, 10:21 PM

Just buy an aftermarket one.

Redog · 02-20-2013, 11:48 PM

Nice to meet you

Should be an easy junkyard pull if you have one around you.

Or for $28.79, you can just buy the entire thing from Rock Auto, brand new.

If you go this route, click on the link on our front page, it helps the site

http://www.rockauto.com/catalog/x,ca...,parttype,5552

zzyzzx · 02-21-2013, 09:03 AM

I think the OP is looking for the top part that you take off when you are doing things like replacing the serpentine belt. I'd be trying a junkyard / part out here / dealer for that part.

ndkpyro · 02-23-2013, 11:42 PM

Thanks guys, I am thinking I will just go pull it from the junk yard. @zzyzzx it is the lower metal portion that is cracked, bolts to the body. On rock auto DEA Part # A2933 shows the metal part for reference.

ndkpyro · 02-27-2013, 11:11 AM

the stealership wanted $136 for it :O pulled it at the junkyard from a grandam se with the 2.4 twin-cam for $7.02.

zzyzzx · 02-28-2013, 10:01 AM

That's a good price for a JY motor mount.

MilzyZ34 · 04-16-2013, 12:50 PM

http://www.milzymotorsports.com/mms-...-engine-mount/