Need Beginning Advice

[Barind]

I'm a college student taking mechanical engineering. I have around 10 grand saved up to spend on my car. I own a 2004 gls alero with the 3400 engine. What parts would I be able to buy to get the best performance increase staying in budget? If there is another post with a list i apologize, could not find it.

[DJx79x]

for performance parts the best two places to go online are www.milzymotorsports.com and www.wot-tech.com

Probably a mild turbo kit with supporting mods from Milzy Motorsports.

[03Sleepr]

Suspension mods and a turbo setup from mms, then an f40 6; speed if funds allow..

Jump in on the sway bar group buy they are working on.

And welcome! Got an pics?

[xXManwhoreXx]

I'd pay off college

[04PONTIACGA]

Originally Posted by xXManwhoreXx

I'd pay off college

^^^^^^this!!!!

[WhiteV6]

If you don't have 2 cars, the 2nd car should be your toy and then you won't worry about if the car will get you to class.

[Redog]

Originally Posted by xXManwhoreXx

I'd pay off college

Originally Posted by 04PONTIACGA

^^^^^^this!!!!

X3

Originally Posted by WhiteV6

If you don't have 2 cars, the 2nd car should be your toy and then you won't worry about if the car will get you to class.

Exactly

[AleroB888]

It's Summer vacation, ain't it?

[Barind]

Originally Posted by Redog

X3



Exactly

I worked a lot through high school, college money is fine haha. That's in a separate account. I'll get some pictures in. This is a side project I'll be working on.

[Barind]

http://www.milzymotorsports.com/gran...onversion-kit/

Also what are the opinions on that transmission? Is it that much improvement over the stock?

[sleepyalero]

some people have that, with the upgrades that tranny should do well. along with a good tune. the stock one you can tune as well and make it work pretty good. idk the power you are wanting.

my turbo build i plan on going all out. gonna cost me atleast 20+ grand.

[Nas Escobar]

IF you're upgrading the trans, why not go all out and do 6 speed?? I've always said go big or go home.

[sleepyalero]

6 speed hasnt been tested with boosted applications really other then a 700 hp ls6 i believe fiero. dont see why it couldnt hold the power.

[Barind]

Originally Posted by sleepyalero

some people have that, with the upgrades that tranny should do well. along with a good tune. the stock one you can tune as well and make it work pretty good. idk the power you are wanting.

my turbo build i plan on going all out. gonna cost me atleast 20+ grand.

What are your recommendations for being close to that? Sorry for all the questions, just entering this world haha. Learning as much as possible.

[sleepyalero]

close to what?

[Barind]

Sorry, i meant like close to your build that you are shooting for.

[sleepyalero]

Originally Posted by Barind

Sorry, i meant like close to your build that you are shooting for.

well dont really wanna say what all im doing but... race block, forged internals, turbo set up, heads, etc... milzy has a full crate motor build you can do and add whatever you want to it. and it will give you a price at the bottom on his site. check it out.

[Barind]

Originally Posted by sleepyalero

well dont really wanna say what all im doing but... race block, forged internals, turbo set up, heads, etc... milzy has a full crate motor build you can do and add whatever you want to it. and it will give you a price at the bottom on his site. check it out.

Yeah that's what i said close . Figured you'd not want to do show and tell. I'll take a look on the website. I'm sure as I advance through my classes and practice I'll be able to figure out the best route.

[02AleroGLS]

I have a stupid question. I have the 3400 sfi engine and i keep reading where people are talking about a 3x00 engine! Is there any difference between that engine and my 3400 whats the difference?